Up till now, there have been three models in the mid-range series in the TORION programme from CLAAS. Their ranks have now been boosted by the arrival of the TORION 1511 P. ‘P’ stands for power, because as well as more engine output and more torque, the TORION 1511 P also features a more powerful drive for noticeably enhanced driving dynamics. This makes the model particularly suitable for clamp work and straw bale handling.
More engine output, more powerful drive
The 6.8 l six-cylinder DPS engine compliant with Stage V emissions standard in the new TORION delivers a rated output of 168 kW/228 hp, which is precisely 40 hp more than in the TORION 1511. With a maximum torque of 900 Nm at 1,600 rpm, there is sufficient reserve capacity for even the highest clamp. What's more, the TORION 1511 P operates extremely efficiently with the assistance of the DYNAMIC COOLING function which adjusts the fan speed from 100 to 1,050 rpm to suit the cooling requirement. The time interval for fan reversal, supplied as standard, can be adjusted in the control terminal.
The optional large 310 l diesel tank holds enough fuel for long working days. The unique installation position of the engine crosswise and well back in the machine affords excellent access for maintenance and acts as a counterbalance so less extra ballast is needed at the rear of the TORION.
The oil pump capacity on the VARIPOWER drive has been increased to 145 ccm to provide additional dynamism, allowing the TORION 1511 P to reach a SMART ROADING top speed at a quiet, fuel-efficient 1800 rpm. By comparison, the hydraulic pump on the TORION 1511 has a capacity of 105 ccm. During rapid load cycles the new TORION 1511 P also benefits from its low operating weight, which is 300 kg below that of the TORION 1511, producing a favourable power-to-weight ratio of just 62 kg/hp. The VARIPOWER drive features three driving ranges to ensure that the optimum gear ratio is selected at all times. The second axial piston motor is automatically disconnected at speeds of over 16 km/h. VARIPOWER also offers the same driving performance in forward and reverse and hydraulic braking assistance to reduce wear on the brakes and tyres.
Large wheels up to 750/65 R26 and two drive axles with self-locking differentials with a 45 percent lock value provide outstanding traction even under difficult conditions. The mudguards on the front wheels can be infinitely adjusted inwards by up to 10 cm to provide an optimum view of the outer edges of the front wheels when working up against the walls of the clamp. This prevents damage to the mudguards as well. The height of the mudguards can also be adjusted by 36 cm for clamp operations. Optional rugged collision protection at the rear prevents damage to the back of the vehicle in the event of a collision.
